Intelligent Battery & Power System (IBPS) Evaluation kits: (Special Introductory Pricing) everything you need to add a DC power supply with battery power and integrated charger to your device; Modules, cables, mechanical standoffs, integrated battery charging, AC adapter for charge power, two software applications to observe the performance of the system and each battery pack (Windows™) The regulated version provides 12V, 5V and 3.3V DC and system signals. The unregulated kit provides battery voltage 12-16.6 (when on battery) 18V when charge voltage present. Note: Order Batteries separately per your requirements for current and capacity. |
| ||
| EK-07 REGULATED BC-1022 IBPS Backplane KIT (Outputs 12V, 5V, 5VSB, 3.3V,-12V) The EK-07 Regulated Kit with ATX output (12V, 5V, 5VSB, 3.3V, -12V) includes all the key components for rapid prototype testing a new battery system. The power in and out cables are already connected to the board so the entire system is plug and play. The BC-1022 battery controller is a tiny backplane design for adding safe and reliable Lithium Ion battery power to a new or existing platform. The controller's small footprint and extensive battery monitoring capability gives system designers the perfect solution for adding 1 or 2 smart battery packs (recommended pack BA89HC). The high efficiency system manages all aspects of the battery charging and discharging along with critical battery monitoring support via direct RS232 communications or external LCD or LED options. When it comes to charging, the BC-1022 takes a wide range of inputs from standard AC/DC power supplies, DC/DC vehicle power or solar panels. | |
| ||
| ||
| EK-06 UNREGULATED BC-1022 IBPS Backplane KIT The EK-06 Unregulated Kit provides all the essential components for rapid prototype testing. The power in and out cables are already connected to the board so the entire system is plug and play. The BC-1022 battery controller is a tiny backplane design for adding safe and reliable Lithium Ion battery power to a new or existing platform. The controller's small footprint and extensive battery monitoring capability gives system designers the perfect solution for adding 1 or 2 smart battery packs (recommended pack BA89HC). The high efficiency system manages all aspects of the battery charging and discharging along with critical battery monitoring support via direct RS232 communications or external LCD or LED options. When it comes to charging, the BC-1022 takes a wide range of inputs from standard AC/DC power supplies, DC/DC vehicle power or solar panels. | |
| ||
| ||
| EK-03 SINGLE MODULE REGULATED EVALUATION KIT The EK-03 is based on the BBDC-02R, Dual Battery Controller with ATX Power Supply. The BBDC-02R supports two BA95 Smart battery packs (sold separately) for up to 190 Watt-hours of battery power. The ATX power supply electronics are ultra efficient and supply 12V @7Amps; 5V & 3.3V @10Amps; -12V @ 0.3A with efficiencies up to 98%. The kit also contains a PS150 Power Supply, DC In Jumper Cable, Serial Port Conversion and Extension Cables, Regulated Power Cable (ATX & Disk), Momentary On/Off Switch Cable and User CD. Note: The EK-03 Evaluation Kit does not include battery packs. Please order 1 to 2 packs to complete the kit. *** In Stock *** | |
| ||
| ||
| EK-04 UNREGULATED IBPS POWER KIT Unregulated Power Kit. This battery system does not have a DC-DC converter and provides the user with the RAW battery voltage which moves between 11 to 16.8 Volts as the packs discharge and 18V when the AC adapter is plugged in and charging. In most cases the EK-05 kit is used to power electronics that require regulated outputs. Kit includes one Base Battery Management Module, Power Supply, DC IN Jumper Cable, System Power Output Cable, Serial Port Conversion Cable, and User CD. BB-04FR Battery Management Module size is PC104, 3.6" x 3.8" (or BB-04SR 2.91" x 3.58" by request) The unregulated IBPS module provides a voltage that varies as the battery is discharged. The range when the battery is sourcing the load is 11-16.8V and 18V+ when the system is provided with a charge voltage. Note: The evaluation kit EK-04, will support 1 to 4 battery packs, sold separately. Please order the Smart Battery packs to complete the kit. "R" at the end of the part number indicates the parts are RoHS compliant | |
| ||
| ||
| EK-05 BATTERY CONTROLLER & REGULATED DC KIT Regulated Power Kit includes a base Controller Module that manages the charging/discharging of the attached smart battery packs and an ATX DC DC Converter which outputs regulated 3.3V@10A, 5V@10A, 12V@12A and -12V. BB-04FR Battery Management Module size is PC104, 3.6" x 3.8" (or BB-04SR 2.91" x 3.58" by request) DC123SR ATX Converter Module size is 2.91" x 3.58" (will stack directly on either the BB-04FR or BB-04SR) Kit allows user to power an Embedded Computer and related electronics such as the VIA EPIA MINI-ITX MODULES from battery power. This configuration supports up to four (4) battery packs for a total of about 400 watt-hours of power. This is six (6) times the power capacity of an average laptop. The EK-05 is based on the BB-04FR module and is limited to four batteries maximum. If you need higher current or need eight battery support you need to order the MP-xx or XP-xx Series controllers. Contact sales@ocean-server.com for a different kit. Kit also contains, AC/DC Power Supply PS150, DC IN Jumper Cable, Serial Port Conversion Cable (DB9 M), Regulated Power Cable (ATX Cable), and User CD. Note: The EK-05 evaluation kit does not include battery packs. Please order 1 to 4 Smart Battery packs to complete the kit. Please note: "R" indicates the parts are RoHS compliant. The DC123SR only comes in one size but will work with either size of the BB-04xx board. | |
|