| ||
| SYS POWER OUTPUT CABLE, 24" 19-00004-24 Unterminated pigtail used to connect the unregulated DC power output on the OceanServer Base Battery Management Module to the system being powered. | |
| ||
| ||
| ATX AND DISK POWER CABLE 19-00014-00 Connects 20 pin ATX connector on OceanServer DC-DC Converter Module with industry standard Motherboard and system disks. | |
| ||
| ||
| POWER Y SPLITTER CABLE, 1 MALE 4 POS. TO 2 FEMALE 4 POS., 8" 19-00016-00 This cable expands a single 4 position power cable into two 4 position 5.25" power connectors. | |
| ||
| ||
| DC-DC LOAD SHARING CABLE, 14", STRAIGHT THROUGH 24P 19-00025-14 Cable used when two DCx converters are used in Parallel for N+1 operation or power scaling. Only used in configurations with two DC2 or two DC1 DC-DC converters. | |
| ||
| ||
| MP-04/08 TO DCx CONVERTER CABLE, 5" 19-00026-05 Cable used to connect the RAW DC output of an MP-04/08 IBSP Controller to the input power of a DC1 or DC2 DC-DC Converter. One cable required per MP-04/08. | |
| ||
| ||
| MP-04/08 TO DCx CONVERTER (RAW DC) CABLE, 8P, 20" 19-00026-20 Cable used to connect the RAW DC output of an MP-08 or MP-04 IBPS controller to the input power of a DC1 or DC2 DC-DC converter. You will need one cable for each MP-0x in the system. Each end of the cable has a Molex Mini-FitJr 8 pin connector. | |
| ||
| ||
| DC-023 OUTPUT TO DISK CABLE, 6P TO 4P, 3" 19-00030-03 Cable Connects the DC-023 DC-DC converter regulated output to a standard disk 4 pin connector. Can be used with the Y-cable to create two disk standard connectors for connection with user embedded systems that need disk four pin connectors. Supplies 5V and 12V. | |
| ||
| ||
| DC-023 OUTPUT CABLE, 5V, 12V, 3.3V, 6P, 16" 19-00031-16 This cable is used to connect the user's system (load) to the regulated output of the DC-023 DC-DC converter. The cable uses the Molex 6 pin connector. Length 16" with blunt cut ends for the user to connect his device. | |
| ||
| ||
| DC2U REGULATED POWER OUTPUT CABLE, 30" 19-00044-30 Connects the regulated output of a DC2U Step-Up DC-DC Module to the user's system (load). Ring tongue terminals on user load end, 30" length. | |
| ||
| ||
| DC1U-1V and DC123SR REGULATED POWER OUT CABLE W/RING TERMINALS, 30" 19-00047-30 Connects the regulated power output of the DC1U module and the 4 pin 12V only output connector of the DC123SR to the user's system (load). Ring tongue terminals on user load end, 30" length. | |
| ||
| ||
| MP/XP-08 SYSTEM OUTPUT CABLE, 19-00049-00, 18" Unterminated (blunt cut) pigtail used to connect the unregulated DC power output of the OceanServer Small Outline XP-08S and MP-08S Modules to the system being powered. | |
| ||
| ||
| MP/XP-08S TO DCxU CONVERTER CABLE, 19-00050-00, 10" Connects the unregulated DC power output of the OceanServer Small Outline XP-08S and MP-08S Modules to the DC1U or DC2U DC-DC Converters. | |
|